Vacuum Tank (For Silicone Mold Making)
No.0129

This Vacuum Tank works with Vacuum Pump (No.0465) and Clear Liquid Silicone (No.7060).

It can duplicate wax mold, ABS RP mold, plastic mold, or original item to silicone mold for massive production. 
The set can also apply to enamel sintering, extracting bubbles while mixing.
If you are interested, please contact us for more information. 

Dimensions (approx.) : ø 20 cm (dia.) x 32.5 cm (H)
Inside dimensions (approx.) : ø 13.3 cm (dia.) x 21 cm (H)

Vacuum Tank is used to extract bubbles within thick slime, e.g. liquid silicone, clear liquid color jewel, soap and candle. The metal tank is robust and has long life span.
Using a pressure lid on the vacuum tank can accelerate the elimination of bubble inside the mold and increase the yield rate.

※ Vacuum tank with acrylic lid must use with vacuum pump to process vacuum operation. ※
※ Using a pressure lid on vacuum tank must use with air compressor to pressurize to tank. ※

Dimensions (approx.) : ø 20 cm (dia.) x 32.5 cm (H)
Inside dimensions (approx.) : ø 13.3 cm (dia.) x 21 cm (H)
Pressure lid dimensions (approx.) :
ø 20 cm (dia.) x 10.5 cm (H)

Pressure Lid for Vacuum Tank is use with vacuum tank to extract bubbles within thick slime, e.g. liquid silicone, clear liquid color jewel, soap and candle.
Using this Pressure Lid for Vacuum Tank can speed up the operation.

※ Pressure Lid for Vacuum Tank must connect to an air compressor to pressurize the tank. ※

Dimensions (approx.) : ø 20 cm (dia.) x 10.5 cm (H)

Mold Frame for Silicone Mold Rubber Compound.
Through the process of making silicone mold, you can produce lots of patterns of wax, ABS plastic (RP wax), wood, glass, metal or any fragile objects. You can also use this to preserve your design permanently. Choose frame thickness to suit your model size.

●Sprue former included.
●19 mm & 25 mm available.

Dimensions (Approx.): 44 mm (L) X 19 mm (W)
Thickness: 19 mm / 25 mm