Home  
  Products  
  About us  
  Catalog  
  Contact us  
 
 
 
  Home
  Products
+
Mold Making Tools & Equipments
+
Wax Injection Equipment & Wax Tools
+
Investing Equipment & Tools
+
Steam Dewaxing and Burnout Equipment
+
Casting Equipment and Tools
+
Devesting and Cleaning Equipment
+
Polishing and Finishing Equipment
  MAX Series
  MAX Series - Wheels and Accossries
  Polishing Equipment
  Flex Shafts and Accessories
  Inside Ring Polishing and Grinding
  Brushes, Buffs and Polishers
  Dust Collector
+
Finishing Equipments
+
Workbench and Bench Tools
+
Plating Equipments
+
Cleaning Supplies
+
Laser Equipments
  About us
  Catalog
  Contact Us
 
 

Vulcanizers, Mold Frame, Sprue Former, Sprue Burning Mandrel, Mold Release Compound, Blade

 
Total 12 pages   First  
  Last   1   2   3   4   5   6   7   8   9   10   11   12     Last  
  First  
 
 
 
 
Mini Vulcanizer
No.0534 120V / 60Hz 0535 240V / 50Hz
For vulcanizing rubber molds. Accepts any mold frame up to 7" x 6". Does everything larger, heavier vulcanizers do at a substantial savings in price. Occupies less bench area and operates on only 4 amps. A forged yoke with acme threads affords a powerful thrust to the upper platen Stainless steel guide rods assure equal pressure of ..............................................
read more >>
 
 
Standard Vulcanizer
No.0540 120V / 60Hz 0541 240V / 50Hz
Manufactured by WW Since 1975, this vulcanizer has a traditional design favored by many. 
Its small base takes the least amount of bench space even though the platens are standard size (5-1/4 x 8"). The wheel / lever handle provides maximum leverage. Acme threads on shaft provide maximum pressure on .................................................................................................
read more >>
 
 
8×8 Heavy Duty Vulcanizer
No.0546 120V / 60Hz 0547 240V / 50Hz
Heavy steel guide posts ensure parallel platen alignment, Accurate dual-dial mercury thermostats give you independent control of each platen, eliminating uneven platen temperature and mold results. Heavy-duty cast aluminum frame; heavy-duty guide posts
read more >>
 
 
Single Hole Mold Frame | Double Hole Mold Frame
No.0515V 0516 ... more size No.0525V 0526V ... more size

Made of machined cast aluminum for best heat distribution.
Strong and durable ................................................................................................................................

read more >>
 
 
Blue Diamond White Label Rubber – Strips / kg
No.7056 

It is easy to make molds and the molds will be more durable. 
The temperature of vulcanization is 152
, and each (roughly 3mm) takes 7.5 minutes. ................................................................................................................................

read more >>
 
 
Sprue Former w/ Rod
No. 0504 11.5 mm (dia.) x 9 mm (H) 0505 14.8 mm (dia.) x 10 mm (H)
Sprue Former is an essential tool when making rubber mold. It ensures full contact between the mold and wax injector nozzle. Choosing Sprue Former size depends on the thickness of your rubber mold.  It is best to place in the middle between two pieces of rubber (roughly 3.5mm) .....................................................................................................................................................
read more >>
 
 
Sprue Former
No. 0507 9 mm (dia.) x 5 mm (H) 0508 11 mm (dia.) x 6.5 mm (H)
Supplied in an aerosol spray can for easy application. Eliminates wax adhesion to rubber or metal molds .............................................................................................................................................
read more >>
 
 
Sprue Burning Mandrel
No.0500
Made of steel with shaped tip and insulated wood handle. Heat with torch and apply to rubber mold to create a smooth entry of wax. Conforms to nozzle on most .........................
read more >>
 
 
Mold Release Compound
No.6050 240 C.C. 8 oz.
Supplied in an aerosol spray can for easy application. Eliminates wax adhesion to rubber or metal molds .............................................................................................................................................
read more >>
 
 
Rubber Mold Clamp
No.7105

Cutting rubber mold is a complicated task during casting.It takes experiences, patience and concentration. Having the mold properly aligned .........................................................................

read more >>


 
Silicone Mold Rubber Compound 500ml
No.7060
Place flasks in the vacuum chamber add premeasured water first into the mixing chamber and put premeasured investment into the same mixing chamber. Switch on vacuum pump and start with the mixing under the vacuum, turning the flask table and filling into each flask under the vacuum, no more air bubble to ........................................................................................
read more >>


 
Vacuum Tank (For Silicone Mold Making)
No.0128
This Vacuum Tank works with Vacuum Pump (No.0465) and Clear Liquid Silicone (No.7060). 
It can duplicate wax mold, ABS RP mold, plastic mold, or original item to silicone mold for massive production. The set can also apply to ...............................................................................
read more >>


 
Mold Frame
No.0538A 19mm 0538B 25mm
Mold Frame for Silicone Mold Rubber Compound. Through the process of making silicone mold, you can produce lots of patterns of wax, ABS plastic (RP wax), wood, glass, metal or any ........................................................................................
read more >>


 
Vacuum Table For Investing And Casting
No.0479 
Vacuum to extract bubbles thoroughly while pouring investment slurry into the flask. Its light-weighted desktop design is not only space-saving but also highly portable. This VACCUM TABLE FOR INVESTING AND CASTING can also be.................................................................................
read more >>
 
 
 
 
 
   
 
W & W Co., Inc. No.104, Sec.1, Fen Liao Road, Lin Kou, Taipei (24452), Taiwan, R.O.C Phone: (886) 2-2601-7601~4 ‧ Fax: (886) 2-2601-7600