|
|
|
|
|
|
|
|
|
Digital Incontrol Vacuum Wax Injector Multifunction System
No.0662C 120V
No.0663C 240V
THE COMPLETE SYSTEM CAN DOUBLE THE PRODUCTIVITY AND OPERATOR BY MAKING DEFECT-FREE WAX PATTERN.
Digital incontrol vacuum wax injector along with the digital techtrol pro auto clamp, pressure controller and vacuum pump to deliver consistent, repeatable, best finish wax patterns.
Draws air out of the mold before injection, eliminating the air bubbles and voids defects.
Vacuum time can be varied for different patterns.
Immediately after vacuuming, wax is injected into the mold, injection time is preset for each mold by the operator. |
|
|
|
Specifications: |
|
|
|
No.0662C |
120VAC (complete) |
|
contains |
NO.0634 Digital techtrol pro auto clamp and pressure controller, |
|
|
NO.0465 Vacuum pump. |
|
No.0663C |
240VAC (complete) |
|
contains |
NO.0663 Digital vacuum wax injector, |
|
|
NO.0635 Digital techtrol pro auto clamp and pressure controller, |
|
|
NO.0466 Vacuum pump. |
|
|
|
|
Digital Incontrol Vacuum Wax Injector
No.0662 120V / 10A
No.0663 240V / 5.0A
INTRODUCING A NEW AGE DIGITAL, MORE FUNCTION VACUUM WAX INJECTOR.
Digital incontrol-vacuum wax injector designed inject consistent, repeatable wax patterns.
Draw air out of the mold before inject the wax, eliminating the air bubbles
and voids all cause pattern defects and shrinkage increase.
|
|
|
|
|
|
Digital Techtrol Pro
Auto-Clamp And Pressure Controller
No.0634 120V
No.0635 240V
For Wax Injection System
|
|
|
|
Specifications : |
Power : |
115V~120VAC 2 AMP |
|
|
220V~240VAC 1 AMP |
|
Max Air Pressure: |
70 psi (5 kg) |
|
Control Console: |
8¼"(W) x 13½"(D) x 7½"(H) (210 x 345 x 190 mm) |
|
Clamp Mechanism: |
6¼"(W) x 7"(D) x 8¼"(H) (160 x 180 x 210 mm) |
|
Maximum Mold Size: |
104 mm (W) x 38 mm (H) x 90 mm (D) |
|
|
|
0630-C Guide |
|
|
|
|
|
|
|
Vacuum Pump
No.0465 120V / 60Hz / 120W 0.5L/S 160 ml
No.0466 240V / 50Hz / 120W 0.5L/S 160 ml
No.0465 |
120V 60Hz 120W 0.5L/S 160ML |
|
25cm (W) x 11cm (D) x 25cm (H) |
No.0466 |
240V 50Hz 120W 0.5L/S 160ML |
|
25cm (W) x 11cm (D) x 25cm (H) |
|
|
|
|
|
|
|
|
|
Jumbo Clamp
No.0621001
★ Works with your own Incontrol.
★ Special designed exclusively for interchangeable use with Techtrol Auto-mold Clamp.
★ New jumbo clamp to work with your jumbo rubber molds Maximum Mold Size:
4-1/16" W (104mm) x 5-1/2" D (140mm) x 1-1/2" H (38mm)
★ For inject larger thick piece of wax patterns that you may have second higher pressure injection.
★ By press the pre-set pressure button (after first injection started) (example: if you have set first injection pressure at 10 psi. And after start of injection than you may press at 14 psi of pressure or even higher for immediately force more waxes to fill up the mold to avoid the shrinkage. )
★ Consistent performance is need for production.
★ Combine to work with your already own vacuum wax injection system.
★ To build up more controlled quality.
|
|
|
|
|
Specifications: |
|
|
★ Interchangeable use with Techtrol Auto-mold Clamp. |
|
Max Pressure: |
70 psi (5 kg) |
|
Max Size Mold To Use: |
4-1/16" W (104mm) x 5-1/2" D (140mm) x 1-1/2" H (38mm) |
|
Shipping Weight : |
4 kg |
|
|
|
|
|
|
|
|
|
|
|
|