|
|
|
|
|
MAX Series - Wheels and Accossries |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
MAX 4" Expander Rubber Drum |
No.M0105 |
|
Excellent for lapidary or metal working tasks as deburring sprue removal and contour sanding smoothly without creating flats. Eliminate the need ...................................................... |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Super Sanding Belts 4" |
No.M0205 M0206 M0207 M0208 120 / 240 / 320 / 500Grit |
|
A long lasting abrasive cloth sanding belts use in wet or dry for excellent results in lapidary and metal working applications. Selected silicon carbide abrasive with resin – bonded to durable backing 4 Grits available to fit
.............................................................................................. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
MX 4" Flexi Polishing Wheel |
No.M4202 M4206 M4215 M4230 240 / 600 / 1500 / 3000 Grit |
|
MX Flexi wheels are impregnated with premium – grade silicon carbide materials and brightness great way to apply finishes working in wet. MX wheel ensures smooth and effective contour 1:1 reflection linearity finishing ........................................................................... |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
RA 4" Metal Grinding Wheel |
No.M4200 240 Grit |
|
This molded compressed harder wheels for fast cut and grinding. Removing sprues, parting lines and casting clean up for those desiring a hard wheel surface, but it also provides an excellent wheel for lapping edges and small critical flat area. RA wheel can also replace traditional hand filing steps, while retaining all your precious metal ........................................ |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
MAX Expander Rubber Drum Sander |
No.M0101 |
|
Excellent for lapidary or metal working tasks as deburring sprue removal and contour sanding smoothly without creating flats. Eliminate the need for hand filing work. Drums covered by 1½" thick slightly harder – durometer solid rubber, helping conform to work and reduce cupping. Drum expands when the wheel rotates to hold ................................................ |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Sanding Belts |
No.M0201 M0202 M0203 M0204 120 / 240 / 320 / 500 Grit |
|
A long lasting abrasive cloth sanding belts use in wet or dry for excellent results in lapidary and metalworking applications. Selected silicon carbide abrasive with resin – bonded to durable backing 4 Grits available to fit ............................................................................................. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
RA Metal Grinding Wheels |
No.M0301 240 Grit |
|
This Molded compressed harder wheels for fast cut and grinding.
Removing sprues, parting lines and casting clean up for those desiring a hard wheel surface, but it also provides an excellent wheel for lapping edges and small critical flat area.
RA wheel can also replace traditional hand filing steps, while retaining all ............................................................................... |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
MX Flexi Polishing Wheels |
No.M0501 M0505 M0511 M0512 240 / 600 / 1500 / 3000 Grit |
|
MX Flexi wheels are impregnated with premium – grade silicon carbide materials and brightness great way to apply finishes working in wet and dry polishing wheel ensures smooth and effective contour polishing .......................................................................................... |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
MF Multi - Finishing Wheel |
No.M0610 M0615 M0620 320 / 600 / 1000 Grit |
|
Special develop by MAX wheel made of a cushion – type nylon impregnated with silicon carbide abrasive removal scratches marks and surface imperfections. Replace sand paper and hand filing step different Grit gives very smooth surface finish ........................................... |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
LD Light Deburring Wheel |
No.M0650 |
|
A clean safe and economical wheel for remove Firescale, Sprues, Parting lines and Oxides, Produces a satin finish on Gold, Sterling, Silver, Copper, Brass and stainless steel. 6" dia. x 1" thickners x shaft hole 1" dia. Replace tradition silicon carbide papers and ............................. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|