|
|
|
¡@
|
No.0621001 (Only for Techtrol Pro) |
|
|
¡¹ Works with your own Incontrol. ¡¹ Special designed exclusively for interchangeable use with Techtrol Auto-mold Clamp. ¡¹ New jumbo clamp to work with your jumbo rubber molds maximum mold size:
width:3-1/16" (78mm)
¡¹ For inject larger thick piece of wax patterns that you may have second higher pressure injection. ¡¹ By press the pre-set pressure button (after first injection started) (example: if you have set first injection pressure at 10 psi. And after start of injection than you may press at 14 psi of pressure or even higher for immediately force more waxes to fill up the mold to avoid the shrinkage. ) ¡¹ Consistent performance is need for production. ¡¹ Combine to work with your already own vacuum wax injection system. ¡¹ To build up more controlled quality.
|
 |
|
Speicifications: ¡¹ Interchangeable use with Techtrol Auto-mold Clamp. Max pressure: 70 psi (5 kg) Max size mold to use: 3-1/16" (w) x 1-9/16" (h) x 6" (d) Shipping weight: 4 kg |
|
|
|
¡@ |
¡@ |
¡@ |
¡@
¡@
¡@
¡@
W & W Co., Inc.
No.104,
Sec.1, Fen Liao Road, Lin Kou, Taipei (24452), Taiwan, R.O.C
Phone: (886) 2-2601-7601~4 ¡E Fax: (886) 2-2601-7600
