|
|
|
COMPLETE INCONTROL
VACUUM WAX INJECTION SYSTEM
NO.0662C 120V
NO.0663C 240V
|
|
|
THE COMPLETE SYSTEM CAN DOUBLE THE PRODUCTIVITY AND OPERATOR BY MAKING DEFECT-FREE WAX PATTERN.
Digital incontrol vacuum wax injector along with the digital techtrol pro auto clamp, pressure controller and vacuum pump to deliver consistent, repeatable, best finish wax patterns. Draws air out of the mold before injection, eliminating the air bubbles and voids defects. Vacuum time can be varied for different patterns. Immediately after vacuuming, wax is injected into the mold, injection time is preset for each mold by the operator.
SPECIFICATIONS: 1. 0662C 120VAC (complete) contains NO.0662 digital vacuum wax injector, NO.0634 digital techtrol pro auto clamp and pressure controller, NO.0449 vacuum pump. 2. 0663C 240VAC (complete) contains NO.0663 digital vacuum wax injector, NO.0635 digital techtrol pro auto clamp and pressure controller, NO.0450 vacuum pump.
|
DIGITAL INCONTROL
VACUUM WAX INTECTOR
No.0662 120V 10A
No.0663
240V 5.0A
INTRODUCING A NEW AGE DIGITAL, MORE FUNCTION VACUUM WAX INJECTOR
|
Digital incontrol-vacuum wax injector designed inject consistent, repeatable wax patterns. Draw air out of the mold before inject the wax, eliminating the air bubbles and voids all cause pattern defects and shrinkage increase.
|
|
|
QUALITY DIGITAL CONTROLLED: |
|
|
1. Single injection pressure controlled (to be use in manually with vacuum wax injector). 2. Temperature accuracy ± 1ºF for wax pot and nozzle controlled. 3. Injection time and vacuum time controlled. 4. Single or double pressures inject per one injection controlled (to be combined with our digital thchtrol auto-clamp and pressure controller in auto matically work system). 5. Counts each day of total production rate. |
|
|
SPECIFICATIONS: |
|
|
Power: |
115V~120VAC 10 AMP |
|
|
220V~240VAC 5 AMP |
|
Air pressure: |
30 psi maximum (air compressor not supplied) |
|
Temperature range: |
103ºF (40ºC) ~ 211ºF (99.99ºC) |
|
Vacuum: |
High vacuum 27hg or higher (vacuum pump order separately) |
|
Wax capacity: |
6 lbs (2.7 kg) net. (vacuum tank not placed in the center of the wax tank, more wax capacity than other brand.) |
|
Overall dimensions: |
21-1/2" W x 15" D x 17-1/2" H (546mm x 381mm x 445mm) |
|
Net weight: |
50.6 lbs (23 kgs) |
|
Shipping weight: |
57.2 lbs (26 kgs) |
DIGITAL TECHTROL PRO
AUTO-CLAMP AND PRESSURE CONTROLLER
NO.0634 120V
NO.0635 240V
|
|
→ |
(Digital incontrol vacuum wax injector is not included) |
|
ALL IN YOUR QUALITY CONTROL: 1. Set your consistent clamp pressure on mold provides accurate wax weights every time and leaves your hands free to prepare the next mold. 2. Set your mold forward pressure to meet with injection nozzle complete closed for vacuum and wax injection work. 3. Set your desired pressure from thousands of setting (1/10 psi or 1/10 kg/cm2 increments). 4. Set your after wax injection mold return and holding time with the same clamping pressure for best wax pattern made. 5. Set your single or double injection pressure mode with incontrol vacuum wax injector. |
|
|
SPECIFICATIONS: |
|
|
Power: |
115V~120VAC 2 AMP |
|
|
220V~240VAC 1 AMP |
|
Max air pressure: |
70 psi (5 kg) |
|
Control console: |
8¼"(W) x 13½"(D) x 7½"(H) (210 x 345 x 190 mm) |
|
Clamp mechanism: |
6¼"(W) x 7"(D) x 8¼"(H) (160 x 180 x 210 mm) |
|
Net weight: |
21 lbs (9.55 kgs) |
|
Shipping weight: |
31.9 lbs (14.5 kgs) |
Vacuum Pump
|
|
No.0449 |
120V 70L (2-1/2 CFM) pump + 1/4 hp motor |
|
|
770 rpm 6A 60Hz |
|
|
No.0450 |
240V 70L (2-1/2 CFM) pump + 1/4 hp motor |
|
|
|
770 rpm 3A 50Hz |
|
|
|
W & W Co., Inc.
No.104,
Sec.1, Fen Liao Road, Lin Kou, Taipei (24452), Taiwan, R.O.C
Phone: (886) 2-2601-7601~4 • Fax: (886) 2-2601-7600
