User's Guide

This highly efficient wax injector requires no air compressor or any hand pump.
A simple push on the nozzle with the rubber mold gives immediate injection of the wax. of course wax temperature is important and we recommend that our no. 0570 dial thermometer be ordered for this purpose.
A precise heat control is conveniently located on the unit, and an on/off light is also supplied.
To avoid dust prevent hot heat from hot melt wax pot, a special cover comes with the unit with a hole for insertion of the  thermometer. (thermometer is not included.)
We find many large casters prefer this self-contained unit over much more expensive air pressured units.
Supplied with UL approved three prong (grounded line cord) Unit is available in 120V or 240V models.

Specifications:

Temperature :

32~350ºF  (0~175ºC)

Chamber size :

Deep 5-1/2"  (140mm)

Diameter4"  (100mm)

Overall :

Height 11"   (275mm)

Diameter 8"  (200mm)

Shipping Weight :

12 Lbs  (5.5 kg)

Replacement parts :

No.

0585-007

Temperature controller

0596-012

Heating element 120V 300W

0597-012

Heating element 240V 300W

．Can be used in summer or winter because of consistent quality materials.

．Tough and flexible, but with good memory.

．Versatile for use with the very thinnest filigree pieces and for thicker patterns also.

．Low dwell time in order to accomplish the above.

．High fidelity for detail even in the most difficult molds.

．Low viscosity.

．Self releasing.

．Pleasant odor - Most wax patterns are made by women, who appreciate this feature.

WW Imperial Blue is supplied in bead form.

Burns out clean with little ash－especially if wax is steam eliminated thus ridding the area of smoke or obnoxious fumes.

Home

About Us

Products

Contact Us